Hydraulics and Pneumatics Training


Class Information
Tooling U classes are offered at the beginner, intermediate, and advanced levels. The typical class consists of 12 to 25 lessons and will take approximately one hour to complete.
Class Name:Intro to Fluid Conductors 130
Description:This class provides an overview of fluid power conductors, including pipe, tubing, hose, and manifolds.
Prerequisites: none
Difficulty:Beginner
Number of Lessons:16
Language:English, Spanish

  • Take a Free Trial Class!
  • Contact Us
    		•
    Go to Catalog
    		  

    Below are all the competencies and job programs that contain the class Intro to Fluid Conductors 130. Job programs are our traditional class lists organized according to common job functions. Competencies are our latest job-specific curricula that help tie online learning to practical, hands-on tasks.

    Click on any title to view its details.

    Competencies


    Class Outline
    • Objectives
    • What Is a Conductor?
    • Types of Conductors
    • Leakage
    • Pipe
    • Tubing
    • Hose
    • Minimum Bend Radius
    • Manifolds
    • Manifold Types
    • Size
    • Wall Thickness
    • Pressure Rating
    • Flow Rating
    • Installation
    • Summary
    		  
    Class Objectives
    • Describe conductors.
    • Describe the types of fluid conductors.
    • Define the types of leakage.
    • Describe pipes.
    • Describe tubing.
    • Describe hose.
    • Define minimum bend radius.
    • Describe manifolds.
    • Describe the types of manifolds.
    • Identify the ways conductor size is measured.
    • Describe wall thickness.
    • Define the types of pressure rating.
    • Describe flow rating.
    • Describe the importance of proper conductor installation.

    Class Vocabulary

    Vocabulary TermDefinition
    active component A component characterized by being a source of activity in a fluid system. Active fluid components such as pumps perform an action on hydraulic and pneumatic fluids.
    AISI The American Iron and Steel Institute. AISI is an association responsible for setting standards and creating numbering systems for various ferrous metals.
    ASTM The American Society of Testing and Materials. The ASTM writes and updates specifications for a broad range of materials, including fluid conductors.
    brazed Joined using a filler metal melted at a temperature above 1540°F (840°C), but below the melting point of the base components.
    burst pressure The pressure rating that indicates the pressure at which a conductor failed during a pressure rating test.
    cartridge valve A fluid valve that is screwed directly onto a manifold port.
    conductor A component such as pipe, tube, or hose that conveys liquids within a hydraulic system.
    contaminant Any foreign substance that may cause a loss of efficiency or a breakdown in a fluid system.
    cover The outermost layer of hose that protects the inner layers from the environment and wear.
    crest The high point or peak of a thread.
    drilled metal block manifold A manifold made of steel, aluminum, or cast iron that is drilled to make fluid passages.
    dryseal A sealing condition caused by the crest of one thread contacting the root of another thread. Dryseals do not allow fluid to leak from a fluid system.
    external leakage The unintentional movement of fluid from a system into the environment.
    fatigue life The length of time a conductor remains in service. Conductors with a low fatigue life do not last long under normal working conditions.
    fitting A fluid component that connects, redirects, extends, or terminates the run of a fluid conductor.
    flank The side of a thread between the root and crest.
    flow rating An indication of the volume of fluid that a conductor can handle in a given time.
    force multiplication The exponential increase in available power usually associated with tools and power transmission systems.
    hoop strength The resistance of a fluid conductor to inside pressure. Hoop strength indicates the ability of a conductor to maintain its structural integrity.
    hose A type of hydraulic fluid conductor that joins other components usually in a non-linear fashion. Hose bends and flexes and is the most versatile hydraulic conductor.
    inner tube The innermost layer of hose which contacts the fluid.
    inside diameter The interior surface of a cylindrical part or hole.
    internal leakage The unintentional movement of fluid from one component to another.
    laminar manifold A manifold that is comprised of several layers of metal that are brazed together.
    leakage The unintended movement of fluid either out of a fluid system or from one fluid component to another. Leakage causes a loss of effiency and often leads to system failure.
    manifold A block of metal with multiple integrated channels designed to conduct fluid in confined spaces.
    minimum bend radius A value indicating the limit beyond which a hose should not be bent. If a minimum bend radius is exceeded, a hose will not perfom properly.
    modular-block manifold A fluid conductor that usually supports one valve and is designed to be used in conjunction with other manifolds and fluid components.
    nominal size The size by which pipe is known and sold in the fluid component market. The nominal size of pipe differs from the actual size of pipe.
    nonpositive seal A seal that allows a small amount of fluid to pass through.
    outside diameter The exterior surface of a cylindrical or round feature.
    passive component A component characterized by inactivity. Passive fluid components such as conductors do not perform an explicit action on fluids, but allow fluids to act upon them.
    pipe A type of hydraulic fluid conductor that joins other components, usually in a straight line and on a permanent basis.
    plug A pipe fitting that terminates a run by closing an end. A plug has male threads.
    positive seal A seal that does not allow any amount of fluid to pass through.
    pressure rating An indication of the amount of pressure a fluid conductor can withstand.
    radius die A bending mechansim used to bend a tube to a particular radius specification.
    reinforcement A layer of woven material used to strengthen a hose. Hose may have several layers of reinforcement.
    root The bottom of a thread valley.
    SAE The Society of Automotive Engineers. SAE writes specifications and other data used in a broad range of industries.
    safety factor The ratio of burst strength to working strength. A conductor with a safety factor of 5:1 has a burst pressure that is 5 times the working pressure.
    schedule number A number that describes the thickness of a pipe wall.
    single-piece manifold A fluid conductor that contains the fluid passages and valves of a complete system.
    socket weld flange A device that is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Socket weld flanges enable a pipe to be disconnected and reconnected with ease.
    spiral clearance The presence of space between the root of one thread and the crest of another along the entire length of the thread. Spiral clearance allows fluid to leak from a fluid system.
    support A mechanical device that fixes and stabilizes the position of a fluid conductor.
    tapered Gradually decreasing in size from one end of the object to the other.
    tensile strength The ability of a metal to resist forces that attempt to pull apart or stretch it.
    threads A raised, helical ridge around the interior or exterior of a cylindrically shaped object. Threads are found on conductors and fittings and are used to join components of a fluid system.
    threads per inch TPI. The number of threads in a linear inch along the length of a workpiece.
    tubing A type of hydraulic fluid conductor that joins other components usually in a non-linear fashion. Despite being stronger than pipe, tubing is easily bent.
    wall thickness A value that indicates the thickness of the tubing wall. Wall thickness may remain unchanged as the outside diameter and inner diameter change.
    working pressure The pressure rating that indicates the maximum pressure a conductor should experience in service.