Taper Turning on the Engine Lathe 240
Taper Turning on the Engine Lathe 240 is an introductory class coverning methods for turning basic tapered parts on an engine lathe.
|
150115 150205 150225
|
10
|
Beginner
|
|
Troubleshooting Coating Defects 170
This class covers the basics of troubleshooting coating processes. It includes descriptions of various tools used in the troubleshooting process, including Pareto charts, check sheets, and fishbone diagrams.
|
None
|
16
|
Beginner
|
|
Surface Preparation for Coatings 120
This class covers various options for preparing surfaces before the application of a coating. The class also addresses the nature of common surfaces.
|
680110
|
20
|
Beginner
|
|
Processes for Applying Coatings 140
This class covers the processes used to apply coatings to a variety of surfaces. This class includes descriptions of manual coating, automated coating, electroplating, and powder coating.
|
None
|
17
|
Beginner
|
|
Coating Defects 150
This class covers the common types of coating defects, as well as their related causes and prevention techniques.
|
None
|
17
|
Beginner
|
|
Creating a Mazatrol Program for the Mill 288
This class covers the basics of creating a simple milling program on the Mazatrol Matrix Mill control. Topics include the basic units that comprise a Mazatrol program and the range of machining units available to make almost any milled part.
|
330270 330280
|
21
|
Beginner
|
|
Creating a Mazatrol Program for the Lathe 289
This class covers the basics of creating a simple turning program on the Mazatrol Smart lathe control. Topics include the basic units that comprise a Mazatrol program and the range of turning units available to make almost any turned part.
|
330275 330285
|
18
|
Intermediate
|
|
Safety for Composite Processing 115
This class teaches operators how to protect themselves from illness and injury when working with composites. You will also learn how to store and discard hazardous materials. Finally, you will learn about the agencies that develop and regulate workplace safety standards.
|
None
|
16
|
Beginner
|
|
Surface Finishing Composites 190
Understanding how to finish the surface of a composite part helps an operator create parts that meet the demands of the customer. This class will teach you about surface finishing operations for composite parts.
|
None
|
14
|
Beginner
|
|
Vacuum Bagging Technique: Single-sided Bagging 230
This class covers basic procedures for performing single-sided vacuum bagging. It also covers general safety precautions and strategies for preventing common problems.
|
750110 750150
|
15
|
Intermediate
|
|
Intro to Compression Molding 170
This class will teach you about the compression molding process, as well as the materials and equipment associated with it.
|
750110 750120
|
16
|
Beginner
|
|
Advanced Materials for Composites 135
This class covers the thermoplastic and non-polymeric resins used to create advanced composite parts, as well as the materials used to create high-performance fiber reinforcements.
|
750110
750125
750130
|
16
|
Beginner
|
|
Advanced Thermoset Resins for Composites 130
This class covers the thermoset resins commonly used to create advanced composite parts, as well as their properties and general considerations for material selection.
|
750110
|
15
|
Beginner
|
|
Traditional Composites 125
This class covers the materials commonly used to create resins and reinforcements for traditional composites. It also describes the basic characteristics of polymers.
|
750110
|
15
|
Beginner
|
|
Repair Methods for Composites 250
This class covers basic procedures and best practices for repairing composites, as well as the structure of composite laminates and sandwich panels.
|
750240
|
18
|
Advanced
|
|
Composite Inspection and Defect Prevention 240
This class describes common methods for inspecting composites and preventing defects.
|
750110 750120 750140
|
16
|
Beginner
|
|
Overview of Composite Processes 120
This class covers the basic methods for processing composites, as well as some of the materials used for these processes.
|
750110
|
16
|
Beginner
|
|
Intro to Lay-up and Spray-up Molding 140
This class covers lay-up and spray-up molding of traditional fiberglass composites.
|
750110
|
14
|
Beginner
|
|
Intro to Composites 110
This class covers the basic materials used to make composites, how composites are processed, and the applications of composites in various markets.
|
None
|
12
|
Beginner
|
|
Intro to Submerged Arc Welding 160
This class describes the submerged arc welding process as well as its advantages and limitations.
|
650110 650120 650140
|
14
|
Beginner
|
|