
	Contact Us \| Support

	First-Time Registration

Home > Class Catalog > Class Overview

What is the definition of stripper system?

The assembled components within a die set responsible for stripping the stock from the punch as it retracts.

Learn more about stripper system in the class "Stripper System Components 235" below.

Stripper System Components 235

Stamping Department

Class Information

Tooling U classes are offered at the beginner, intermediate, and advanced levels.
The typical class consists of 12 to 25 lessons and typically requires at least two hours of instruction time.

Class Name	Stripper System Components 235
Description	The class describes the major types of strippers and springs used in die sets, as well as their advantages and disadvantages.
Prerequisites	400110 400130
Difficulty	Intermediate
Number of Lessons	12

	Take a Free Trial Class!
	Contact Me!

Class Outline

Class Objectives

Objectives

The Purpose of Stripper Systems

Fixed vs. Floating Strippers

Floating Stripper Components

Types of Floating Stripper Springs

Mechanical Springs

Mechanical Spring Classifications

Mechanical Spring Assembly

Nitrogen Springs

Mechanical vs. Nitrogen Springs

Stripper Design and Positioning

Summary

Explain the role of the stripper system.

Identify the major categories of strippers.

Identify the common floating stripper components.

Identify the common types of stripper springs.

Describe the characteristics of mechanical springs.

Explain how mechanical springs are classified.

Describe common assembly methods for mechanical springs.

Describe the characteristics of nitrogen springs.

Compare the advantages of mechanical and nitrogen springs.

Explain how die complexity affects the design of the stripper.

Class Vocabulary

Term	Definition
chrome silicon spring	A mechanical spring made from steel containing the alloys chromium and silicon.
chrome vanadium spring	A mechanical spring made from steel containing the alloys chromium and vanadium.
deep drawing	A press operation that creates a hollow recess or cavity within sheet metal. The depth of the recess is greater than the width of the part.
deflection	The distance that a spring travels under a compressive force.
fixed stripper	A stripper that does not move within the die set. Fixed strippers strip the stock from the punch, but they do not hold down the stock during operation.
floating stripper	A stripper that is designed to move as press ram reaches the bottom of its stroke. Floating strippers hold down the stock during the stamping operation and strip the stock.
ISO	The International Organization for Standardization. ISO establishes standards and guidelines for various products and processes. ISO standards often contain metric units.
mechanical spring	A spring consisting of a coil of metal with a hollow center. Each mechanical spring is categorized according to the compressive force it can withstand.
mechanical spring stripper	A stripper consisting of a stripper plate and mechanical springs.
nitrogen spring	A spring consisting of a cylinder containing compressed nitrogen gas that applies pressure to a moveable piston.
nitrogen spring stripper	A stripper consisting of nitrogen springs, which are hollow cylinders containing compressed nitrogen gas.
preloading	The intentional compression of a spring before it is used in an operation.
spring	A device that yields under a compressive force and returns to its original shape once the force is removed.
stripper bolt	A bolt used to attach the stripper plate to the upper or lower die shoe. Mechanical springs may be fitted over the stripper bolt.
stripper plate	The metal plate that contacts the sheet to strip it from the punch. Stripper plates are commonly made from steel.
stripper system	The assembled components within a die set responsible for stripping the stock from the punch as it retracts.
urethane stripper	A stripper consisting of a hollow, cylindrical spring made from urethane rubber. The urethane spring bulges under compressive force.

What is the definition of stripper system?

The assembled components within a die set responsible for stripping the stock from the punch as it retracts.Learn more about stripper system in the class "Stripper System Components 235" below.

Stripper System Components 235

Stamping Department

The assembled components within a die set responsible for stripping the stock from the punch as it retracts.

Learn more about stripper system in the class "Stripper System Components 235" below.