
	Contact Us \| Support

	First-Time Registration

Home > Class Catalog > Class Overview

What is the definition of file?

A data register in a PLC that stores bits of information. Files are often referred to as registers.

Learn more about file in the class "Overview of PLC Registers 305" below.

Overview of PLC Registers 305

PLCs Department

Class Information

Tooling U classes are offered at the beginner, intermediate, and advanced levels.
The typical class consists of 12 to 25 lessons and typically requires at least two hours of instruction time.

Class Name	Overview of PLC Registers 305
Description	This class introduces how digital signals are converted into binary data and how that data is stored into various types of registers.
Prerequisites	none
Difficulty	Beginner
Number of Lessons	14

	Take a Free Trial Class!
	Contact Me!

Class Outline

Class Objectives

Objectives

What Is a PLC Register?

Digital Devices

Binary Data

Binary and Inputs

Inputs and Outputs

Module Addressing

Basic Registers

Input Group Registers

How I/O Values Are Stored in Registers

Data Files

Types of Data Files

Shift Register

Summary

Define PLC registers.

Describe digital devices.

Explain how binary data is communicated.

Describe how bits are used with input signals.

Explain the function of I/O screw terminals on a PLC I/O module.

Describe how modules are addressed.

Identify basic register types.

Describe group registers.

Describe how I/O values are temporarily stored in a PLC's registers.

Describe PLC data files.

Identify the types of data files.

Describe PLC shift registers.

Class Vocabulary

Term	Definition
address	The unique location assigned to each I/O module so that it may be correctly referenced and signaled by the PLC program.
binary	A number system used for PLCs that has either 0 or 1 as a value. Using binary, a function is either on or off.
bit	A single numerical unit in the binary number system. Bit is short for BInary digiT.
bit number	The numbered location of the specific individual bit being addressed. Bit numbers are typically the last number found in an address.
byte	A series of eight bits.
common	The screw terminal on a PLC that connects to the power source.
counter	A set of PLC instructions that counts, calculates, or keeps a record of the number of times something happens.
digital	Consisting of information that is input or output electronically as a series of pulses or signals often resulting in binary strings of 0s and 1s.
examine off	A basic PLC logic instruction symbol. Also referred to as Examine If Open. Examine Off becomes True if an input is absent.
examine on	A basic PLC logic instruction symbol. Also referred to as Examine If Closed. Examine On becomes TRUE if an input is present.
file	A data register in a PLC that stores bits of information. Files are often referred to as registers.
file identifier	A letter code given to each type of data file to make it easier for the programmer to identify the files.
file number	The specific bit number assigned to each type of data file so that it can be easily found within the ladder logic program.
holding register	The PLC equivalent of traditional relays. Holding registers hold data that will later be executed by the processor.
I/O module	The part of a modular PLC to which input and output devices are connected.
input group register	A type of input register that can receive data from 16 consecutive input terminals. Grouping registers is an efficient way to control multiple inputs.
input register	A register that receives and stores data signaled from a hardwired input.
nibble	Four bits in series, or half an 8-bit byte.
output register	A register that stores data on the status of a hardwired output.
read from	The process of a PLC scanning a register and using the data found within that register in a meaningful way.
real-time value	The exact current value of a bit of data. PLC register data is not considered real-time because values can change between PLC scans.
register	A data file in a PLC that stores bits of information. Some PLCs refer to registers as files.
remote I/O	An input/output module that is located far away from the CPU of the PLC.
scan	One complete cycle of a PLC checking inputs, executing its programs, and updating the status of its outputs.
sequential	Doing one and only one step at a time, followed by the next step in a logical order.
shift register	Shifting bits forward or backward within a word to vary how the outputs respond.
slot number	The numbered location of the specific PLC module being addressed.
terminal block	A device that joins wires or cables. Terminal blocks typically snap into a metal rail or are screw-mounted on the panel of a control enclosure.
timer	A set of PLC instructions that automatically starts or stops machines and other devices when a preset time period has been exceeded.
word	A defined and specific number of digits grouped together. For most PLCs, a word consists of 16 digits.
word number	The numbered location of the specific data word being addressed. Word numbers are found only on advanced PLCs.
written to	The process of a PLC storing data within a register for later use.

What is the definition of file?

A data register in a PLC that stores bits of information. Files are often referred to as registers.Learn more about file in the class "Overview of PLC Registers 305" below.

Overview of PLC Registers 305

PLCs Department

A data register in a PLC that stores bits of information. Files are often referred to as registers.

Learn more about file in the class "Overview of PLC Registers 305" below.