What is the definition of "wedge"?
A friction-based inclined plane used to spread apart two opposing forces. A wedge is often used to split wooden logs.

Learn more about wedge in the class Rigging Mechanics 220 below.

## Rigging Training

Class Information
 Tooling U-SME classes are offered at the beginner, intermediate, and advanced levels. The typical class consists of 12 to 25 lessons and will take approximately one hour to complete.
 Class Name: Rigging Mechanics 220 Description: This class covers the mechanical laws involved in rigging, as well as essential practices for calculating the weight of a load and determining its center of gravity. Difficulty: Advanced Number of Lessons: 20 Language: English, Spanish

Class Outline
• Objectives
• What Is Mechanics?
• Inclined Planes
• Wedges
• Levers
• Fixed Pulleys
• Force
• Equilibrium
• The Effects of Motion and Inertia
• Friction
• Stress
• Deformation
• Shock
• Mechanical Failure
• Common Mechanical Failure Modes
• Vertical and Horizontal Force
• Center of Gravity
• Determining the Center of Gravity: Example
• Summary

Class Objectives
• Define mechanics.
• Describe inclined planes.
• Describe wedges.
• Describe levers.
• Describe fixed pulleys.
• Describe how force acts on an object.
• Describe equilibrium.
• Describe the effects of motion and inertia.
• Describe friction.
• Distinguish between the different types of stress.
• Distinguish between the different types of deformation.
• Describe shock.
• Define mechanical failure.
• Distinguish between different types of mechanical failure.
• Describe how to calculate loads.
• Describe the effects of vertical and horizontal forces on a load.
• Describe the center of gravity.
• Explain how to determine a load's center of gravity.

Class Vocabulary

Vocabulary TermDefinition
To gain velocity or increase speed in a given direction.
The rate of change of velocity.
The energy or effort provided to a machine to perform work. Applied force has many forms, from the power of an electric motor to the push from human hands.
The center around which a wheel or component rotates.
An endless loop of material used to transmit motion between two or more pulleys. Belts require friction to stay in contact with the pulleys.
A device used to stop motion, usually through friction.
The bulging, bending, bowing, or kinking of an object as a result of compressive stress.
The point on a body at which the weight is distributed equally in every direction.
A force that attempts to flatten or "squeeze" a material.
The disintegration of a material in the form of rust, pitting, or cracking. Corrosion fatigue typically is caused by environmental conditions.
The slow deformation of a material over time. Also known as yielding.
To lose velocity or reduce speed in a given direction.
To change shape.
The change in an object's size or shape as a result of stress.
The path that an object takes when it moves.
A wedge used to hold open a door by placing it between the bottom of the door and the floor.
The pulley on a machine that receives power from the driver pulley via a belt.
The pulley on a machine that is attached to the power source, such as an electric motor.
A metal that can be drawn, stretched, or formed without breaking.
The temporary change in the shape of an object as a result of stress. Once the stress is removed, the object returns to its original shape.
A state of balance. Objects that are in equilibrium are either completely still or moving at a consistent rate.
The wearing away of a material through processes such as abrasion, dissolution, or corrosion.
A specific type of mechanical failure. Buckling, creep, fatigue, corrosion, and wear are examples of mechanical failure modes.
Progressive structural damage to an object that is subjected to cumulative stress from repeated loads.
The number of times an object can carry a load before it fails. Fatigue life shortens as the stress on the object increases.
A device consisting of a wheel rigidly fixed to a shaft that is used with a belt to transmit energy and motion to another fixed pulley.
An influence that produces a change in an object's motion or state of rest. A force has a specific direction and magnitude.
The breaking of an object into two or more pieces as a result of stress.
A force that resists motion between two objects that are in contact with each other. Smoother surfaces exhibit less friction, while rougher surfaces exhibit more friction.
A pivot point of a lever, or the point around which an object turns.
A simple machine consisting of a flat angled surface used to raise objects. The mechanical advantage of an inclined plane increases with its length.
The tendency of an object at rest to stay at rest, and an object in motion to stay in motion, unless acted upon by an outside force.
A tool used for lifting large or heavy objects. Jacks are used for items that cannot, or should not, be lifted with a crane or hoist.
A type of simple machine consisting of a rigid bar that pivots on a fulcrum. Levers are used to transmit motion and alter mechanical advantage.
The opposition to applied force, such as a weight to be carried or moved.
The use of a slippery substance, such as oil or graphite, placed between two moving surfaces that are in contact with each other. Lubrication minimizes friction, which aids movement and reduces heat.
The measurement of the amount of an applied force.
The difference between the applied force and the work accomplished. Mechanical advantage allows machines to perform more work with less effort.
A condition in which a device loses its capacity to carry a load. Mechanical failure is typically caused by overload.
The rules and principles applied to the branch of physics known as mechanics. Mechanics deals with different forces that cause or prevent motion.
The branch of physics concerned with the motion of objects. Mechanics deals with different forces that cause or prevent motion.
A circular lever that rotates around the fulcrum. A block and tackle is an example of a moveable pulley.
An intersection of two lines or objects at right angles. The delivered forces exerted by a wedge are perpendicular to its direction of travel.
A flat or level surface.
Deformation that is permanent. Plastic deformation occurs after excessive elastic deformation.
The place on the object where the force is applied. Point of application can affect forces such as torque and momentum.
A type of inclined plane. A ramp is often used to load materials onto a truck bed or to allow pedestrians to walk from one level to another.
The opposition to a force, such as the weight of a load or friction to movement.
The process of lifting and moving heavy loads with ropes, chains, and mechanical devices.
A long, narrow board equally balanced in the middle on a fulcrum.
A long cylindrical device such as a rod or pole. On a wheel, the shaft extends from the center of the wheel along its axis.
The physical change resulting from two parallel planes sliding across each other. Shear strain is the result of shear stress.
A force that attempts to cause the internal structure of a material to slide against itself.
A thin wooden wedge used in woodworking to tighten and fill gaps in loose wooden parts.
The jarring impact caused by sudden acceleration, deceleration, vibration, or collision. The effect of mechanical shock on an object depends on the object's structure and the materials from which it is made.
A rigging tool that keeps the legs of a sling at a 90° angle. Spreader beams reduce horizontal forces on slings.
The ratio of change in a dimension that takes place with a material under stress.
A force that attempts to deform an object.
The measure of a material's ability to stretch before deforming or breaking.
A force that attempts to pull apart or stretch a material.
A force causing rotation.
The continued, repetitive, periodic motion in a machine or other structures.
The erosion of material as a result of friction. Wear typically is caused by two or more objects rubbing or sliding against each other.
A friction-based inclined plane used to spread apart two opposing forces. A wedge is often used to split wooden logs.
A wheel that is rigidly fixed to a central post that rotates with the wheel. A fixed pulley is an example of a wheel and axle.
The point on the stress-strain curve where there is a sudden increase in strain, but no increase in stress. It is at this point that a metal is about to permanently deform.
The slow deformation of a material over time. Also known as creep.