What is the definition of "air purifier"?
A device which removes contaminants from air. When working in enclosed spaces, welders may need an air purifier or a respirator to provide clean air for breathing.

Learn more about air purifier in the class Oxyfuel Welding Safety 105 below.


Welding Training


Class Information
Welding Training Tooling U-SME classes are offered at the beginner, intermediate, and advanced levels. The typical class consists of 12 to 25 lessons and will take approximately one hour to complete.
Class Name:Oxyfuel Welding Safety 105
Description:This class covers the basic safety procedures for handling oxyfuel welding equipment, including personal protective equipment, ventilation, and fire safety.
Prerequisites: none
Difficulty:Beginner
Number of Lessons:16
Language:English, Spanish
 
Go to Catalog

Class Outline
  • Objectives
  • Oxyfuel Welding Safety
  • Oxyfuel Welding Clothes
  • Face and Eye Safety: Welding Masks
  • Face and Eye Safety: Goggles
  • Oxyfuel Equipment Inspection
  • Torch Safety
  • Torch Malfunctions
  • Welding Tip Safety
  • Proper Cylinder Handling
  • MAPP Gas Safety
  • Hose Safety
  • Ventilation
  • Locations for Oxyfuel Welding
  • Fire Safety
  • Summary
  
Class Objectives
  • Explain the importance of safety during oxyfuel welding.
  • Describe proper clothes to wear during oxyfuel welding.
  • Explain filter plates and lenses.
  • Describe the dangers of not wearing eye protection.
  • Explain how to inspect an oxyfuel outfit.
  • Explain how to handle a torch safely.
  • Identify torch malfunctions.
  • Describe how to safely maintain welding tips.
  • Explain how to properly handle cylinders.
  • Explain how to safely handle MAPP gas.
  • Describe how to use hoses safely.
  • Explain how welding fumes are vented.
  • Identify locations for oxyfuel welding.
  • Describe basic fire safety for oxyfuel welding.

Class Vocabulary

Vocabulary TermDefinition
acetylide A highly explosive chemical compound that is created by the interaction between acetylene and copper. Copper tubing should never be used to splice oxyfuel hoses due to the risk of creating acetylide.
air purifier A device which removes contaminants from air. When working in enclosed spaces, welders may need an air purifier or a respirator to provide clean air for breathing.
arc flash An extremely painful condition that results from excess exposure to UV rays. Arc flash can feel like sunburn on the eye; it is usually a temporary condition.
arc welding A fusion welding process that uses electricity to generate the heat needed to melt the base metals.
auto-darkening filter plate A type of filter plate that automatically adjusts to the proper amount of shading for any welding process.
backfire A torch malfunction in which the flame moves up into the tip of the torch. Backfire is fairly common and is not a major safety concern.
combustible Any substance that is capable of igniting and burning.
cylinder truck A two-wheeled dolly used to safely move gas cylinders. Cylinder trucks can be used to safely store gas cylinders temporarily as well.
downdraft table A table for welding which uses suction to pull fumes downward through the table, away from the welder.
filter plate The shaded protective lens inside the welder's helmet that filters out harmful rays and intense bright light. The amount of shading required depends on the welding process.
fire extinguisher A portable device that uses a rapid spray of chemicals to put out small fires.
fire shield A large, flame-resistant screen. Fire shields are placed around the area of welding to protect bystanders from spatter, the arc's harmful rays, and bright light.
fire-resistant Made of materials which are designed to resist burning and withstand heat.
flashback A torch malfunction in which the flame briefly or continually moves up into the torch and hoses. If a flame reaches the hoses, an explosion can occur.
flashback arrestor A part of an oxyfuel outfit that is installed between the hoses and the torch. A flashback arrestor reduces the chances of flashback occurring while a torch is used.
fume Metallic vapor that is emitted during the weld process. The metallic vapor solidifies to form tiny particles of metal.
fume extractor Any device that uses suction to remove from the environment the smoke and gases generated by welding.
infrared Invisible rays emitted during the welding process. Infrared rays can damage vision.
MAPP gas A liquefied petroleum gas that can be used in oxyfuel processes. Some disadvantages of MAPP gas include high cost and inability to work with steel.
nonpetroleum soap Soap that does not contain petroleum, which can be flammable.
overhead welding Welding that is done above eye level. This type of welding requires extra safety precautions.
personal protective equipment Any example of various safety equipment that workers wear or use to prevent injury in the workplace. Safety glasses are common personal protective equipment (PPE).
polyester A fabric made of man-made materials that can melt in the presence of the torch's extreme heat. Jerseys are sometimes made of polyester.
rayon A fabric made of man-made materials that can melt in the presence of the torch's extreme heat. Button-down shirts are sometimes made of rayon.
respirator A gas mask that filters out harmful dust, fumes, and gases from the air being breathed.
sustained backfire A torch malfunction in which the flame continually burns inside the torch, sometimes moving as far into the torch as the handle. Sustained backfire is considered extremely dangerous.
ultraviolet Harmful invisible rays emitted by the torch during welding. UV rays can damage a welder's vision and burn skin.
valve cap A device used to prevent the flow of gas from a cylinder while not in use.
welding hood A stationary ventilation device installed above the weld area. The welding hood sucks up harmful fumes in its surrounding area.