
	Contact Us \| Support

	First-Time Registration

Home > Class Catalog > Class Overview

What is the definition of counterbore?

A larger diameter added at a hole opening, with a flat surface between the two diameters. A counterbore provides a space for the head of a bolt or other type of fastener.

Learn more about counterbore in the class "Interpreting Blueprints 230" below.

Interpreting Blueprints 230

Shop Essentials Department

Class Information

Tooling U classes are offered at the beginner, intermediate, and advanced levels.
The typical class consists of 12 to 25 lessons and typically requires at least two hours of instruction time.

Class Name	Interpreting Blueprints 230
Description	This class provides an overview of common features found in prints and describes how to properly inspect them. Includes an Interactive Lab.
Prerequisites	800120 800130
Difficulty	Intermediate
Number of Lessons	16

	Take a Free Trial Class!
	Contact Me!

Class Outline

Class Objectives

Objectives

The Importance of Reading Prints

The Sample Print

Common Shop Terminology

Angles, Chamfers, and Tapers

Sample Print: Angled Features

Common Hole Features

Sample Print: Hole Dimensions

Corner Radii and Arcs

Sample Print: Radius Dimension

Surface Finish

Sample Print: Surface Finish

Threads

Thread Standards

Sample Print: OD Thread

Summary

Describe the relationship between prints and inspection.

Identify information in a print relating to a section view.

Identify shop terminology that commonly appears in prints.

Identify information in a print that specifies angled features.

Describe proper methods for checking an angled feature on a part.

Identify common types of hole features.

Describe proper methods for checking a hole on a part.

Identify information in a print that specifies a feature with a radius.

Describe proper methods for checking a corner radius on a part.

Describe how surface finish is specified in a common print.

Describe proper methods for checking surface finish on a part.

Identify common methods for specifying a thread in a print.

Describe a thread based on its standard specification.

Describe proper methods for checking an OD thread on a part.

Class Vocabulary

Term	Definition
arc	A curved feature representing a portion of a circle.
auxiliary view	A view drawn at a right angle to an angled feature of the part. Auxiliary views show the true size of an angled surface.
blind hole	A hole that is closed at its bottom.
blueprint	A document containing all the instructions necessary to manufacture and inspect a part. The key sections of a blueprint are the drawing, dimensions, and notes.
bolt hole pattern	A number of holes with centers that are positioned around the circumference of an imaginary circle.
bore gage	A hole inspection gage that makes three points of contact within the hole. Bore gages are handheld, variable instruments that provide very accurate readings of hole sizes.
boss	A raised, circular peg or protrusion. A boss often has a hole in the center and is used to improve assembly.
burr	A rough, sharp edge remaining on a part after machining or stamping. Burrs pose an injury risk and interfere with the fitting of parts.
casting	A part formed by pouring molten metal into a mold until it cools and solidifies into its final shape. Castings tend to have rougher surface textures.
center	For circles and arcs, it is the point that is equally distant from all other points located on the circle's circumference or the arc.
center line	A line used to define the center of a hole, a cylindrical part, or symmetrical part. Center lines consist of alternating long and short dashes.
chamfer	A small, angled surface added on the end of a shaft, around the opening of a hole, or along an edge. A chamfer removes the sharp edge and helps remove burrs.
corner radius	A rounded internal corner located where two features meet on either a flat or cylindrical part.
counterbore	A larger diameter added at a hole opening, with a flat surface between the two diameters. A counterbore provides a space for the head of a bolt or other type of fastener.
countersink	An enlarged, angled surface added to a hole opening. A countersink differs from a counterbore because it leaves a tapered opening.
deburring	The removal of burrs on a part by processes such as grinding or filing.
degrees	A common unit of measurement used to indicate the size of an angle.
diameter	The distance from one edge of a circle to the opposite edge that passes through the center. Round or cylindrical features require diameter measurements.
fillet	A rounded internal corner. A fillet adds strength to the corner and is often easier to machine.
go gage	A gage on or in which a good part should fit easily.
hidden line	A line used to define a part feature that is not visible in a specific view. Hidden lines consist of a series of short dashes.
ID thread	A thread located on the interior surface of a cylindrical hole.
knurl	A patterned series of grooves or diamond-shaped marks formed into the part surface. A knurl is added to provide a surface for gripping.
machining	The process of removing metal to form or finish a part, either with traditional methods like turning, drilling, milling, and grinding, or with less traditional methods that use electricity, heat, or chemical reaction.
microinches	One-millionth (.000001) of the U.S. standard inch. Surface roughness is typically measured in microinches.
neck	A groove or smaller-diameter section between two larger diameters on a cylindrical part. A neck allows a flush or tight fit between the largest diameter and another part.
no-go gage	A gage on or in which a good part should not fit.
nose radius	The rounded tip on the cutting edge of a single-point tool. The nose radius on a tool leaves a matching corner radius on a part.
OD thread	A thread located on the exterior surface of a cylindrical part or feature.
optical comparator	An inspection instrument that projects a magnified shadow of a part feature onto a screen for measurement.
pictorial method	A blueprint method of specifying a thread by attempting to represent the actual two-dimensional appearance of the thread.
pin gage	A hardened, cylindrical gage used to inspect the size of a hole. Pin gages are available in standard diameters.
pocket	An enclosed recess, often in a rectangular part. Most pockets are square or rectangular with rounded corners.
profilometer	An inspection device that uses a stylus to trace along the surface of a part and determine its average roughness.
radius	The distance from the center to the edge of a circle or arc. The size of a radius determines the size of the circle or arc.
radius gage	A handheld gage with an accurate, rounded corner used to inspect the size of a corner radius on a part. Radius gages are available in a set that offers a range of sizes.
roughness	The inherent, fine, closely spaced irregularities remaining on a part surface after manufacturing.
schematic method	A blueprint method of specifying a thread by showing a series of parallel lines.
section line	A line used to identify the imaginary cut portion of a part in a section view. Section lines appear as a series of diagonal lines drawn close together.
section view	A view illustrating a rotated section resulting from an imaginary cut in the part. Blueprints may contain a variety of different section views.
simplified method	A blueprint method of specifying a thread by including pairs of solid and dashed lines drawn parallel to the thread. The simplified method is the most common method for specifying a thread.
spotface	A shallow, larger diameter added at the top of a hole. A spotface is most often used on castings to provide a flat surface for assembly.
stylus	A small, cone-shaped spherical point made of diamond that contacts the part and measures surface roughness.
surface finish	The degree of smoothness of a part's surface after it has been manufactured. Surface finish is the result of the surface roughness, waviness, and flaws remaining on the part.
taper	For a cylindrical part, it is a gradual decrease in diameter from one end to another. For a flat or rectangular part, it is an angled surface that gradually changes from a larger height to a smaller height at a constant slope or incline.
thread	A raised, helical rib or ridge around the interior or exterior of a cylindrically shaped object. Threads are found on screws, nuts, and bolts and are used to fit parts or provide motion.
thread class	A number and letter combination that indicates the degree of fit for a thread.
thread form	The specific shape or profile of a thread. Thread forms include V-shaped or square threads.
thread ring gage	A disk of heavy metal with a central, threaded hole made to match a particular OD thread. The gage is screwed onto the part being inspected as though the two are mating parts.
thread series	A thread designation that identifies the coarseness or fineness of a thread.
THRU	A hole that passes completely through a part's material.
Unified thread system	A standard thread form based on inches that was developed by the U.S., Canada, and Great Britain.

What is the definition of counterbore?

A larger diameter added at a hole opening, with a flat surface between the two diameters. A counterbore provides a space for the head of a bolt or other type of fastener.Learn more about counterbore in the class "Interpreting Blueprints 230" below.

Interpreting Blueprints 230

Shop Essentials Department

A larger diameter added at a hole opening, with a flat surface between the two diameters. A counterbore provides a space for the head of a bolt or other type of fastener.

Learn more about counterbore in the class "Interpreting Blueprints 230" below.